Configuration file: /etc/hostapd.conf
ctrl_interface_group=0
nl80211: Register Action command failed: ret=-114 (Operation already in progress)
nl80211: Register Action match - hexdump(len=1): 06
nl80211: Failed to register Action frame processing - ignore for now
nl80211: Add own interface ifindex 3
Failed to create interface mon.wlan0: -23 (Too many open files in system)
Try to remove and re-create mon.wlan0
nl80211: Remove interface ifindex=19
nl80211: New interface mon.wlan0 created: ifindex=20
nl80211: Add own interface ifindex 20
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
nl80211: Added 802.11b mode based on 802.11g information
Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=14 dBm
Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=16 dBm
Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=16 dBm
Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=16 dBm
Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=16 dBm
Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=16 dBm
Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=16 dBm
Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=16 dBm
Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=16 dBm
Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=16 dBm
Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=16 dBm
Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=14 dBm
Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=16 dBm
Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=16 dBm
Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=16 dBm
Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=16 dBm
Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=16 dBm
Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=16 dBm
Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=16 dBm
Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=16 dBm
Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=16 dBm
Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=16 dBm
RATE[0] rate=10 flags=0x1
RATE[1] rate=20 flags=0x1
RATE[2] rate=55 flags=0x1
RATE[3] rate=110 flags=0x1
RATE[4] rate=60 flags=0x0
RATE[5] rate=90 flags=0x0
RATE[6] rate=120 flags=0x0
RATE[7] rate=180 flags=0x0
RATE[8] rate=240 flags=0x0
RATE[9] rate=360 flags=0x0
RATE[10] rate=480 flags=0x0
RATE[11] rate=540 flags=0x0
Scan for neighboring BSSes prior to enabling 40 MHz channel
Scan requested (ret=0) - scan timeout 10 seconds
Interface initialization will be completed in a callback
nl80211: Event message available
nl80211: Ignored unknown event (cmd=20)
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Unknown event 5
nl80211: Ignore event for foreign ifindex 19
RTM_DELLINK, IFLA_IFNAME: Interface 'mon.wlan0' removed
Unknown event 5
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
RTM_NEWLINK, IFLA_IFNAME: Interface 'mon.wlan0' added
Unknown event 5
RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'mon.wlan0' added
Unknown event 5
RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Unknown event 5
nl80211: Event message available
nl80211: Scan trigger
nl80211: Event message available
nl80211: New scan results available
Received scan results (4 BSSes)
40 MHz affected channel range: [2407,2457] MHz
Unknown Broadcom information element ignored (type=52 len=26)

unknown vendor specific information element ignored (vendor OUI 00:e0:4c len=6)
Neighboring BSS: 5c:35:3b:88:8b:87 freq=2432 pri=5 sec=9
40 MHz pri/sec mismatch with BSS 5c:35:3b:88:8b:87 <2432,2452> (chan=5+) vs. <2422,2442>
20/40 MHz operation not permitted on channel pri=3 sec=7 based on overlapping BSSes
Completing interface initialization
Mode: IEEE 802.11g  Channel: 3  Frequency: 2422 MHz
Flushing old station entries
Deauthenticate all stations
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=0 set_tx=1 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
Using interface wlan0 with hwaddr 48:5d:60:d0:fa:a6 and ssid 'FRITZ!Box Fon WLAN 7270.'
Deriving WPA PSK based on passphrase
SSID - hexdump_ascii(len=24):
     46 52 49 54 5a 21 42 6f 78 20 46 6f 6e 20 57 4c   FRITZ!Box Fon WL
     41 4e 20 37 32 37 30 2e                           AN 7270.        
PSK (ASCII passphrase) - hexdump_ascii(len=63): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
WPA: group state machine entering state GTK_INIT (VLAN-ID 0)
GMK - hexdump(len=32): [REMOVED]
GTK - hexdump(len=16): [REMOVED]
WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0)
wpa_driver_nl80211_set_key: ifindex=3 alg=3 addr=(nil) key_idx=1 set_tx=1 seq_len=0 key_len=16
RSN pre-auth interface 'wlan0'
Using existing control interface directory.
ctrl_iface bind(PF_UNIX) failed: Address already in use
ctrl_iface exists and seems to be in use - cannot override it
Delete '/var/run/hostapd/wlan0' manually if it is not used anymore
Failed to setup control interface
RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Unknown event 5
STA 5c:ac:4c:1d:f6:71 sent probe request for our SSID
STA 5c:ac:4c:1d:f6:71 sent probe request for broadcast SSID
mgmt::proberesp cb
mgmt::proberesp cb
STA 5c:ac:4c:1d:f6:71 sent probe request for our SSID
STA 5c:ac:4c:1d:f6:71 sent probe request for broadcast SSID
mgmt::proberesp cb
mgmt::proberesp cb
STA 5c:ac:4c:1d:f6:71 sent probe request for our SSID
STA 5c:ac:4c:1d:f6:71 sent probe request for broadcast SSID
mgmt::proberesp cb
mgmt::proberesp cb
mgmt::auth
authentication: STA=5c:ac:4c:1d:f6:71 auth_alg=0 auth_transaction=1 status_code=0 wep=0
  New STA
wlan0: STA 5c:ac:4c:1d:f6:71 IEEE 802.11: authentication OK (open system)
wlan0: STA 5c:ac:4c:1d:f6:71 MLME: MLME-AUTHENTICATE.indication(5c:ac:4c:1d:f6:71, OPEN_SYSTEM)
wlan0: STA 5c:ac:4c:1d:f6:71 MLME: MLME-DELETEKEYS.request(5c:ac:4c:1d:f6:71)
authentication reply: STA=5c:ac:4c:1d:f6:71 auth_alg=0 auth_transaction=2 resp=0 (IE len=0)
mgmt::auth cb
wlan0: STA 5c:ac:4c:1d:f6:71 IEEE 802.11: authenticated
mgmt::reassoc_req
reassociation request: STA=5c:ac:4c:1d:f6:71 capab_info=0x431 listen_interval=10 current_ap=48:5d:60:d0:fa:a6
WMM IE - hexdump(len=7): 00 50 f2 02 00 01 00
Validating WMM IE: OUI 00:50:f2  OUI type 2  OUI sub-type 0  version 1  QoS info 0x0
  new AID 1
HT: STA 5c:ac:4c:1d:f6:71 HT Capabilities Info: 0x11ee
update_sta_ht STA 5c:ac:4c:1d:f6:71 - no greenfield, num of non-gf stations 1
hostapd_ht_operation_update current operation mode=0x0
hostapd_ht_operation_update new operation mode=0x7 changes=2
nl80211: Set beacon (beacon_set=0)
wlan0: STA 5c:ac:4c:1d:f6:71 IEEE 802.11: association OK (aid 1)
mgmt::reassoc_resp cb
wlan0: STA 5c:ac:4c:1d:f6:71 IEEE 802.11: associated (aid 1)
wlan0: STA 5c:ac:4c:1d:f6:71 MLME: MLME-REASSOCIATE.indication(5c:ac:4c:1d:f6:71)
wlan0: STA 5c:ac:4c:1d:f6:71 MLME: MLME-DELETEKEYS.request(5c:ac:4c:1d:f6:71)
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x21c1910 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=5c:ac:4c:1d:f6:71
wlan0: STA 5c:ac:4c:1d:f6:71 WPA: event 1 notification
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x21c1910 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=5c:ac:4c:1d:f6:71
wlan0: STA 5c:ac:4c:1d:f6:71 WPA: start authentication
WPA: 5c:ac:4c:1d:f6:71 WPA_PTK entering state INITIALIZE
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x21c1910 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=5c:ac:4c:1d:f6:71
wlan0: STA 5c:ac:4c:1d:f6:71 IEEE 802.1X: unauthorizing port
WPA: 5c:ac:4c:1d:f6:71 WPA_PTK_GROUP entering state IDLE
WPA: 5c:ac:4c:1d:f6:71 WPA_PTK entering state AUTHENTICATION
WPA: 5c:ac:4c:1d:f6:71 WPA_PTK entering state AUTHENTICATION2
WPA: 5c:ac:4c:1d:f6:71 WPA_PTK entering state INITPSK
WPA: 5c:ac:4c:1d:f6:71 WPA_PTK entering state PTKSTART
wlan0: STA 5c:ac:4c:1d:f6:71 WPA: sending 1/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0)
nl80211: Event message available
nl80211: Ignored unknown event (cmd=19)
IEEE 802.1X: 5c:ac:4c:1d:f6:71 TX status - version=2 type=3 length=95 - ack=1
IEEE 802.1X: 121 bytes from 5c:ac:4c:1d:f6:71
   IEEE 802.1X: version=1 type=3 length=117
wlan0: STA 5c:ac:4c:1d:f6:71 WPA: received EAPOL-Key frame (2/4 Pairwise)
WPA: 5c:ac:4c:1d:f6:71 WPA_PTK entering state PTKCALCNEGOTIATING
WPA: PTK derivation - A1=48:5d:60:d0:fa:a6 A2=5c:ac:4c:1d:f6:71
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=48): [REMOVED]
WPA: 5c:ac:4c:1d:f6:71 WPA_PTK entering state PTKCALCNEGOTIATING2
WPA: 5c:ac:4c:1d:f6:71 WPA_PTK entering state PTKINITNEGOTIATING
wlan0: STA 5c:ac:4c:1d:f6:71 WPA: sending 3/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=1 mic=1 ack=1 install=1 pairwise=8 kde_len=46 keyidx=1 encr=1)
Plaintext EAPOL-Key Key Data - hexdump(len=56): [REMOVED]
IEEE 802.1X: 5c:ac:4c:1d:f6:71 TX status - version=2 type=3 length=151 - ack=1
IEEE 802.1X: 99 bytes from 5c:ac:4c:1d:f6:71
   IEEE 802.1X: version=1 type=3 length=95
wlan0: STA 5c:ac:4c:1d:f6:71 WPA: received EAPOL-Key frame (4/4 Pairwise)
WPA: 5c:ac:4c:1d:f6:71 WPA_PTK entering state PTKINITDONE
wpa_driver_nl80211_set_key: ifindex=3 alg=3 addr=0x21c1910 key_idx=0 set_tx=1 seq_len=0 key_len=16
   addr=5c:ac:4c:1d:f6:71
AP-STA-CONNECTED 5c:ac:4c:1d:f6:71
wlan0: STA 5c:ac:4c:1d:f6:71 IEEE 802.1X: authorizing port
wlan0: STA 5c:ac:4c:1d:f6:71 RADIUS: starting accounting session 51CF0816-00000000
wlan0: STA 5c:ac:4c:1d:f6:71 WPA: pairwise key handshake completed (RSN)
mgmt::action cb
mgmt::action cb
STA 00:04:20:27:b1:de sent probe request for broadcast SSID
mgmt::proberesp cb
Unknown Broadcom information element ignored (type=52 len=26)

unknown vendor specific information element ignored (vendor OUI 00:e0:4c len=6)
STA 00:04:20:27:b1:de sent probe request for broadcast SSID
mgmt::proberesp cb
STA 30:39:26:26:11:3a sent probe request for broadcast SSID
STA 30:39:26:26:11:3a sent probe request for broadcast SSID
mgmt::proberesp cb
mgmt::proberesp cb
Unknown Broadcom information element ignored (type=52 len=26)

unknown vendor specific information element ignored (vendor OUI 00:e0:4c len=6)
Unknown Broadcom information element ignored (type=52 len=26)

unknown vendor specific information element ignored (vendor OUI 00:e0:4c len=6)