ubuntuusers.de

SMART-Test

Autor:
WinniePoo
Datum:
8. Oktober 2015 12:19
Code:
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
sudo smartctl -a /dev/sdasmartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-49-generic] (local build) 
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org 

=== START OF INFORMATION SECTION === 
Model Family:     SandForce Driven SSDs 
Device Model:     KINGSTON SV300S37A120G 
Serial Number:    50026B785200B786 
LU WWN Device Id: 5 0026b7 85200b786 
Firmware Version: 583ABBF0 
User Capacity:    120.034.123.776 bytes [120 GB] 
Sector Size:      512 bytes logical/physical 
Rotation Rate:    Solid State Device 
Device is:        In smartctl database [for details use: -P show] 
ATA Version is:   ATA8-ACS, ACS-2 T13/2015-D revision 3 
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) 
Local Time is:    Thu Oct  8 11:21:22 2015 CEST 
SMART support is: Available - device has SMART capability. 
SMART support is: Enabled 

=== START OF READ SMART DATA SECTION === 
SMART overall-health self-assessment test result: PASSED 

General SMART Values: 
Offline data collection status:  (0x02)	Offline data collection activity 
					was completed without error. 
					Auto Offline Data Collection: Disabled. 
Self-test execution status:      (   0)	The previous self-test routine completed 
					without error or no self-test has ever 
					been run. 
Total time to complete Offline 
data collection: 		(    0) seconds. 
Offline data collection 
capabilities: 			 (0x7d) SMART execute Offline immediate. 
					No Auto Offline data collection support. 
					Abort Offline collection upon new 
					command. 
					Offline surface scan supported. 
					Self-test supported. 
					Conveyance Self-test supported. 
					Selective Self-test supported. 
SMART capabilities:            (0x0003)	Saves SMART data before entering 
					power-saving mode. 
					Supports SMART auto save timer. 
Error logging capability:        (0x01)	Error logging supported. 
					General Purpose Logging supported. 
Short self-test routine 
recommended polling time: 	 (   1) minutes. 
Extended self-test routine 
recommended polling time: 	 (  48) minutes. 
Conveyance self-test routine 
recommended polling time: 	 (   2) minutes. 
SCT capabilities: 	       (0x0025)	SCT Status supported. 
					SCT Data Table supported. 

SMART Attributes Data Structure revision number: 10 
Vendor Specific SMART Attributes with Thresholds: 
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE 
  1 Raw_Read_Error_Rate     0x0032   095   095   050    Old_age   Always       -       0/12876052 
  5 Retired_Block_Count     0x0033   100   100   003    Pre-fail  Always       -       0 
  9 Power_On_Hours_and_Msec 0x0032   100   100   000    Old_age   Always       -       409h+23m+54.650s 
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       520 
171 Program_Fail_Count      0x000a   100   100   000    Old_age   Always       -       0 
172 Erase_Fail_Count        0x0032   100   100   000    Old_age   Always       -       0 
174 Unexpect_Power_Loss_Ct  0x0030   000   000   000    Old_age   Offline      -       99 
177 Wear_Range_Delta        0x0000   000   000   000    Old_age   Offline      -       0 
181 Program_Fail_Count      0x000a   100   100   000    Old_age   Always       -       0 
182 Erase_Fail_Count        0x0032   100   100   000    Old_age   Always       -       0 
187 Reported_Uncorrect      0x0012   100   100   000    Old_age   Always       -       0 
189 Airflow_Temperature_Cel 0x0000   025   033   000    Old_age   Offline      -       25 (Min/Max 12/33) 
194 Temperature_Celsius     0x0022   025   033   000    Old_age   Always       -       25 (Min/Max 12/33) 
195 ECC_Uncorr_Error_Count  0x001c   120   120   000    Old_age   Offline      -       0/12876052 
196 Reallocated_Event_Count 0x0033   100   100   003    Pre-fail  Always       -       0 
201 Unc_Soft_Read_Err_Rate  0x001c   120   120   000    Old_age   Offline      -       0/12876052 
204 Soft_ECC_Correct_Rate   0x001c   120   120   000    Old_age   Offline      -       0/12876052 
230 Life_Curve_Status       0x0013   100   100   000    Pre-fail  Always       -       100 
231 SSD_Life_Left           0x0013   100   100   010    Pre-fail  Always       -       0 
233 SandForce_Internal      0x0032   000   000   000    Old_age   Always       -       285 
234 SandForce_Internal      0x0032   000   000   000    Old_age   Always       -       242 
241 Lifetime_Writes_GiB     0x0032   000   000   000    Old_age   Always       -       242 
242 Lifetime_Reads_GiB      0x0032   000   000   000    Old_age   Always       -       485 

SMART Error Log not supported 

SMART Self-test log structure revision number 1 
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error 
# 1  Extended offline    Completed without error       00%       408         - 
# 2  Extended offline    Completed without error       00%       349         - 

SMART Selective self-test log data structure revision number 1 
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS 
    1        0        0  Not_testing 
    2        0        0  Not_testing 
    3        0        0  Not_testing 
    4        0        0  Not_testing 
    5        0        0  Not_testing 
Selective self-test flags (0x0): 
  After scanning selected spans, do NOT read-scan remainder of disk. 
If Selective self-test is pending on power-up, resume after 0 minute delay.